I started by picking a font and making a template with Microsoft Publisher. Then I tacked it to the piece of 2X4 that I was using for the sign. I used a Xacto knife to score the lettering into the wood by pressing it along the outlines of the letters, making sure it cut all the way through to the wood.
Then I used a Dremel rotary tool, and carved out the letting with a couple of routing bits.
After I got the letters all carved, I sanded the wood a bit to remove the rough edges, then painted inside the letters with some acrylic paint.
I nailed the top part of the sign to another section of 2X4 and left it outside for a few months so it could get that old weathered look.
For the 2006 party, I drilled a hole through the bottom of the post and tied the sign to a section of broken cinderblock and sunk it to the bottom of the pool along with a treasure chest I built and a Blucky. It was just kind of a "coming attraction" kind of thing for 2007's planned party theme.
All information contained on this website www.howloweenqueen.com is provided for FREE, is intended for entertainment purposes and general sharing, and may not be reproduced without express permission from the website owner. If you have been sold information regarding or taken from this website, please contact the admin at the link in the navigation menu. Copyright 1999-2008, The Dead End.